CABLE mgmt

Cable Management for ES Enclosures
  • Safely route bundles vertically in the enclosure

  • Up to 2 (in 42"D ES enclosure) or 3 (in 48"D enclosure) fit in each rear corner of enclosure

  • Can also be installed in front of enclosure (horizontal lacing bar must be used)

  • Troughs are 3"W x 2.5"D

  • Troughs are 3"W x 2.5"D

Vertical Cable Troughs

VCT-91 - Vertical Cable Trough for 91"H ES Enclosure; 76"H x 3"W x 2.50"D
VCT-91C - Vertical Cable Trough for VCT-91
VCT-84 - Vertical Cable Trough for 84"H ES Enclosure; 68"H x 3"W x 2.50"D
VCT-84C - Vertical Cable Trough Cover for VCT-84
VCT-79 - Vertical Cable Trough for 79"H ES Enclosure; 62"H x 3"W x 2.50"D
VCT-79C - Vertical Cable Trough Cover for VCT-79

product image
  • Mounts to the front face of any rail to provide space to mount three, 1
    RMU pieces of equipment

  • Metal weldment with plastic "fingers" that align with RMU on the rail

  • Metal hinged magnetic cover to secure and protect cables

  • Trough dimensions of 7.3" x 3.6" (at its widest point)

  • Cable fill rate of 192 cables (when using cable with outside diameter of .23")

  • Find Out More!

vertical cable manager

VCM-91K - Vertical Cable Manager for 910ES-30 Enclosures
VCM-84K - Vertical Cable Manager for 840ES-30 Enclosures
VCM-79K - Vertical Cable Managers for 790ES-30 Enclosures

product image
  • Cable Manager for use between two ES enclosures 
    or at the end of a row

  • Two adjustable vertical troughs (front and rear)

  • Fingers easily pass cables from enclosure to side car

  • Repositionable cable managements posts create separate
    pathways for large bundles

  • Large openings in trough to run cables front to rear

  • Hundreds of attachment points for cable straps

  • Includes doors to protect cable and present a clean
    appearance

External Cable Manager* OR side car

SC129148 - 12"W External Cable Manager, for use with 91"H x 48"D ES Enclosures
SC69148 - 6"W External Cable Manager, for use with 91"H x 48"D ES Enclosures
SCP9148 - End Panel for 91"H x 48"D External Cable Managers
SC129142 - 12"W External Cable Manager, for use with 91"H x 42"D ES Enclosures
SC69142 - 6"W External Cable Manager, for use with 91"H x 42"D ES Enclosures
SCP9142 - End Panel for 91"H x 42"D External Cable Managers
SC128448 - 12"W External Cable Manager, for use with 84"H x 48"D ES Enclosures
SC68448 - 6"W External Cable Manager, for use with 84"H x 48"D ES Enclosures
SCP8448 - End Panel for 84"H x 48"D External Cable Managers
SC128442 - 12"W External Cable Manager, for use with 84"H x 42"D ES Enclosures
SC68442 - 6"W External Cable Manager, for use with 84"H x 42"D ES Enclosures
SCP8442 - End Panel for 84"H x 42"D External Cable Managers
SC127948 - 12"W External Cable Manager, for use with 79"H x 48"D ES Enclosures
SC67948 - 6"W External Cable Manager, for use with 79"H x 48"D ES Enclosures
SCP7948 - End Panel for 79"H x 48"D External Cable Managers
SC127942 - 12"W External Cable Manager, for use with 79"H x 42"D ES Enclosures
SC67942 - 6"W External Cable Manager, for use with 79"H x 42"D ES Enclosures
SCP7942 - End Panel for 79"H x 42"D External Cable Managers

*External Cable Managers are not stocked product. Please call for lead time.

  • Obrounds for cinch straps

  • Square hole pattern to install optional 1/4 turn "D" rings along any of the bars

  • Vertical bars independent of enclosure rails; adjustable, front to rear

  • Kits and single bars available

  • Find Out More!

  • Watch on YouTube

 3.5" x 5"

1.5" x 3.5"

Vertical Cable Management Bar Kits

(Includes 1 vertical and 2 horizontal cable bars, and six, 12"L cinch straps)

VCB-4836 - Vertical cable bar kit for 480ES Enclosure
VCB-7936 - Vertical cable bar kit for 790ES Enclosure
VCB-8436 - Vertical cable bar kit for 840E-36 & 840ES Enclosures
VCB-9136 - Vertical cable bar kit for 910ES Enclosure

Horizontal Cable Bars

HCB-32 - Horizontal Cable Bar for 32"D enclosure
HCB-36 - Horizontal Cable Bar for 36", 42", and 48"D enclosures

Vertical Cable Bars

(Includes six, 12"L cinch straps)

VCB-48 - Vertical Cable Bar for 48"H enclosure; bar dimensions: 32"H x 4"W
VCB-72 - Vertical Cable Bar for 72"H enclosure; bar dimensions: 56"H x 4"W
VCB-79 - Vertical Cable Bar for 79"H enclosure; bar dimensions: 62"H x 4"W
VCB-84 - Vertical Cable Bar for 84"H enclosure; bar dimensions: 68"H x 4"W
VCB-91 - Vertical Cable Bar for 91"H enclosure

Note: Single, vertical bars can only be installed when at least 2 horizontal bars are also installed

Overhead cabling options facilitate the flow of cable in and out of the enclosure. Top Cable Troughs and Ladder Rack Brackets attach directly to the top of ES Enclosure - no overhead infrastructure changes are needed! The strength of ES Enclosures can easily handle multiple large bundles of cable.

Cable Management Rail Kit

Top Cable Trough

Cable Management Rail Kit

End Cap Assembly installed on Top Cable Trough

Top Cable Troughs

TCT24 - Top Cable Trough with hardware for 24"W ES Enclosures; 6.50"W x 4"D x 24"L
TCT24EC - End Cap Assembly for TCT24
TCT30 - Top Cable Trough with hardware for 30"W ES Enclosures; 6.50"W x 4"D x 30"L
TCT30EC - End Cap Assembly for TCT30

Standard Air Manager HIGH FLOW AIR MANAGER

Adjustable Ladder Rack Brackets

Standard Air Manager Fan Tray HIGH FLOW AIR MANAGER

Adjustable Ladder 
Rack Bracket

Side Airflow Manager HIGH FLOW AIR MANAGER

Fixed Height Ladder 
Rack Bracket

Ladder Rack Brackets

LRB-12A1 - Single Height Adjustable Bracket (6.5" -11.5") with hardware, supports 12"W ladder rack; load rating of 100 lbs. on EN and ES Enclosures
LRB-12A2 - Single Height Adjustable Bracket (14" -24") with hardware, supports 12"W ladder rack; load rating of 100 lbs. on EN and ES Enclosures
LRB-24A1 - Single Height Adjustable Bracket (6.5" -11.5") with hardware, supports 12, 18, & 24"W ladder rack; load rating of 100 lbs. on EN and ES Enclosures
LRB-24A2 - Single Height Adjustable Bracket (14" - 24") with hardware, supports 12, 18, & 24"W ladder rack; load rating of 100 lbs. on EN and ES Enclosures
LRB-12 - Single Fixed Height Bracket (3") with hardware, supports 12"W ladder rack
LRB-24 - Single Fixed Height Bracket (3") with hardware, supports 12,18, & 24"W ladder rack

Cable Management for EN Enclosures

Overhead cabling options facilitate the flow of cable in and out of the enclosure. Top Cable Troughs and Ladder Rack Brackets attach directly to the top of ES Enclosure - no overhead infrastructure changes are needed! The strength of ES Enclosures can easily handle multiple large bundles of cable.

Cable Management Rail Kit

Enclosure shown for reference

Cable Management Rail Kit

End Cap Assembly installed on Top Cable Trough

Top Cable Troughs

TCT32 - Top Cable Trough with hardware for 32"W EN Enclosures; 6.50"W x 6"D x 32"L
TCT40 - Top Cable Trough with hardware for 40"W EN Enclosures; 6.50"W x 6"D x 40"L
TCT3240EC - End Cap Assembly for TCT32 and TCT40

Standard Air Manager HIGH FLOW AIR MANAGER

Adjustable Ladder Rack Brackets

Standard Air Manager Fan Tray HIGH FLOW AIR MANAGER

Adjustable Ladder 
Rack Bracket

Side Airflow Manager HIGH FLOW AIR MANAGER

Fixed Height Ladder 
Rack Bracket

Ladder Rack Brackets

LRB-12A1 - Single Height Adjustable Bracket (6.5" -11.5") with hardware, supports 12"W ladder rack; load rating of 100 lbs. on EN and ES Enclosures
LRB-12A2 - Single Height Adjustable Bracket (14" -24") with hardware, supports 12"W ladder rack; load rating of 100 lbs. on EN and ES Enclosures
LRB-24A1 - Single Height Adjustable Bracket (6.5" -11.5") with hardware supports 12, 18, & 24"W ladder rack; load rating of 100 lbs. on EN and ES Enclosures
LRB-24A2 - Single Height Adjustable Bracket (14" - 24") with hardware, supports 12, 18, & 24"W ladder rack; load rating of 100 lbs. on EN and ES Enclosures
LRB-12 - Single Fixed Height Bracket (3") with hardware, supports 12"W ladder rack
LRB-24 - Single Fixed Height Bracket (3") with hardware,
supports 12,18, & 24"W ladder rack

Cable Management for E Enclosures
  • Obrounds for cinch straps

  • Square hole pattern to install optional 1/4 turn "D" rings along any of the bars

  • Vertical bars independent of enclosure rails; adjustable, front to rear

  • Kits and single bars available

  • Find Out More!

  • Watch on YouTube

 3.5" x 5"

1.5" x 3.5"

Vertical Cable Management Bar Kits

(Includes 1 vertical and 2 horizontal cable bars, and six, 12"L cinch straps)

VCB-4832 - Vertical cable bar kit for 480E Enclosure
VCB-7232 - Vertical cable bar kit for 720E-32 Enclosure
VCB-7236 - Vertical cable bar kit for 720E-36 Enclosure
VCB-8432 - Vertical cable bar kit for 840E-32 Enclosure
VCB-8436 - Vertical cable bar kit for 840E-36 & 840ES Enclosures

Horizontal Cable Bars

HCB-32 - Horizontal Cable Bar for 32"D enclosure
HCB-36 - Horizontal Cable Bar for 36", 42", and 48"D enclosures

Vertical Cable Bars

(Includes six, 12"L cinch straps)

VCB-48 - Vertical Cable Bar for 48"H enclosure; bar dimensions: 32"H x 4"W
VCB-72 - Vertical Cable Bar for 72"H enclosure; bar dimensions: 56"H x 4"W
VCB-84 - Vertical Cable Bar for 84"H enclosure; bar dimensions: 68"H x 4"W

Note: Single, vertical bars can only be installed when at least 2 horizontal bars are also installed

product image
  • Mounts to the front face of any rail to provide space to mount three, 1 RMU pieces of equipment

  • Metal weldment with plastic "fingers" that align with RMU on the rail

  • Metal hinged magnetic cover to secure and protect cables

  • Trough dimensions of 7.3" x 3.6" (at its widest point)

  • Cable fill rate of 192 cables (when using cable with outside diameter of .23")

  • Find Out More!

vertical cable manager

VCM-84K - Vertical Cable Manager for 840E-29 Enclosures

Cable Management for Racks

vertical cable management for racks

VCM5-FR - Vertical Front and Rear Cable Management, 5" Channel x 80"L; includes black snap-on covers
VCM5-FO - Vertical Front Cable Management, 5" Channel x 80"L; includes includes black snap-on covers

VCM8-FR - Vertical Front and Rear Cable Management, 8" Channel and 80"L; includes 4 cable spools, 12 wire retainers, and black hinge covers
VCM8-FO - Vertical Front Cable Management, 8" Channel and  80"L; includes 2 cable spools, 6 wire retainers, and black hinge covers; not compatible with 4PHD-2436 and 4PM6 racks

VCM12-FO - Vertical Front Cable Management, 12" Channel x 80"L; includes black hinge cover

Cable Organizers

Cable Management Rail Kits are made of multiple pieces of 7 RMU sections of "fingers." When used with ES enclosure, fingers are installed on the front of the rail using Great Lakes flexible mounting profile, a series of holes outside of the EIA pattern (used for fingers and other accessories). EN rails have more than one series of holes (as pictured), so fingers can be installed on the front, side, or rear of rail. Fingers align with rack mount units on both enclosures, creating clean cable pathways.

Cable Management Rail Kit
Cable Management Rail Kit

Cable Management Rail Kit

ESC-K12 - Cable Management Rail Kit; includes 12 sections of "fingers" (each section, 7 RMU); if used with E and ES enclosures, rails will need to be recessed 4.5"
ENC-K24 - Cable Management Rail Kit; includes 24 sections of "fingers" (each section, 7 RMU); if used with E and ES enclosures, rails will need to be recessed 4.5"
CM-47 - Single section of 7 RMU "fingers"; if used with E and ES enclosures, rails will need to be recessed 4.5"

NEW! HORIZONTAL CABLE ORGANIZERS WITH 1/4 TURN 'D' RINGS

CM-23

NEW! HORIZONTAL CABLE ORGANIZERS WITH 1/4 TURN 'D' RINGS

CM-24

NEW! Horizontal Cable Organizers with 1/4 turn "D" rings

CM-23 - 1 RMU organizer with five, 1.5" x 3.5", 1/4 turn "D" rings
CM-24 - 2 RMU organizer with five, 3.5" x 5", 1/4 turn "D" rings

Like the functionality of "D" rings? Great Lakes new Vertical and Horizontal Cable Bars are designed with a square hole pattern to accept optional "D" rings. Find Out More!

Standard Air Manager HIGH FLOW AIR MANAGER

CM-02

Standard Air Manager Fan Tray HIGH FLOW AIR MANAGER

CM-04

Side Airflow Manager HIGH FLOW AIR MANAGER

CM-05

Horizontal Cable Organizers for 19" Mounting

CM-02 - Discontinued with a limited quantity available – Low Density Cable Organizer, 2 front vertical rings (1.80"W x 3.80"D), 1 RMU
CM-04 - Interbay Cable Organizer, 4 front horizontal rings, inner dimensions 3.27"H x 2.80"D, 2 RMU
CM-05 - Single-sided Cable Organizer, 5 front horizontal rings, inner dimensions 2.80"H x 1.32"D, 1 RMU

Standard Air Manager HIGH FLOW AIR MANAGER

CM-07

Standard Air Manager Fan Tray HIGH FLOW AIR MANAGER

CM-08

Side Airflow Manager HIGH FLOW AIR MANAGER

CM-09

Horizontal Cable Organizers for 19" Mounting

CM-07 - 19" Rack Mount Waterfall Cable Organizer, 1 RMU
CM-08 - Standard Cable Organizer, 4 front horizontal rings and 4 front vertical rings, inner dimensions 3.80"H x 1.80"D, 2 RMU
CM-09 - Double-sided Cable Organizer, 4 front horizontal rings,4 rear horizontal rings, inner dimensions 1.32"H x 2.80"D, 1 RMU

Standard Air Manager HIGH FLOW AIR MANAGER

CM-15

Standard Air Manager Fan Tray HIGH FLOW AIR MANAGER

CM-15 Side View

Side Airflow Manager HIGH FLOW AIR MANAGER

CM-16

Horizontal Cable Organizers for 19" Mounting

CM-15 - Double-sided Cable Organizer with plastic fingers and covers; front, 2 RMU, 3" x 3"; rear, 1 RMU, 1.5" x 3"; requires 2 RMU for mounting
CM-16 - Single-sided Cable Organizer with plastic fingers and cover, 1 RMU
CM-17 - Single-sided Cable Organizer with plastic fingers and cover, 2 RMU

Standard Air Manager HIGH FLOW AIR MANAGER
Standard Air Manager Fan Tray HIGH FLOW AIR MANAGER

Zero-U Mounting Brackets

Set of two mounting brackets to allow the vertical mounting of 19" EIA equipment (such as patch panels), cable organizers, and power strips. Brackets mount to Great Lakes flexible mounting profile, a series of holes outside of the EIA pattern.
ZR1 - Set of two mounting brackets to mount 1 RMU equipment in 29"W E and 30"W ES Enclosures
ZR2 - Set of two mounting brackets to mount 2 RMU equipment in 29"W E and 30"W ES Enclosures

Standard Air Manager HIGH FLOW AIR MANAGER

CM-10

Cable Management Panels

CM-10 - 19" Horizontal Panel with 10 Slots, .250" x 2.00"

Standard Air Manager HIGH FLOW AIR MANAGER

CM-19

Standard Air Manager Fan Tray HIGH FLOW AIR MANAGER

19SRB

Side Airflow Manager HIGH FLOW AIR MANAGER

CM-03

Strain Relief Bars

CM-19 - 19" Utility Strain Relief Bar, 1 RMU
19SRB - 19" Cable Strain Relief Bar, 1 RMU
CM-03 - Back Side Cable Management, 1 RMU

Standard Air Manager HIGH FLOW AIR MANAGER

CM-11

Standard Air Manager Fan Tray HIGH FLOW AIR MANAGER

CM-13

Side Airflow Manager HIGH FLOW AIR MANAGER

CM-44

CM-425

CMP

Cable Rings and Posts

CM-11 - Cable Management Ring Kit; includes five rings, inner dimensions 3"W x 5"D;
for use with 29"W E and 30"W ES Enclosures; ideal for use with CM-01 cinch straps
CM-13 - Single Cable Ring, inner dimensions 1.06"W x 2.80"D
CM-44 - Single Cable Ring, inner dimensions 3.80"W x 3.80"D
CM-425 - Heavy Duty Cable Ring, inner dimensions 2.30"W x 3.80"D;
for use with two and four post racks with aluminum uprights
CMP - Single Cable Management Post, 3"H
CMP-8 - Package of 8 Cable Management Post, 3"H

Standard Air Manager HIGH FLOW AIR MANAGER

Cable cinch strap

CM-01 - Cinch Strap with buckle and grommet; 12.00"L x 3/4"W; blue
CM-06 - Cinch Strap with buckle and grommet; 6.00"L x 3/4"W; black

Contact Us!